Preventive maintenance guide for heavy machinery axles

Preventive maintenance of axles is essential to ensure optimal performance and longevity of heavy machinery. Dana Spicer axles, known for their durability, require periodic attention to maintain ideal operating conditions.

Periodic visual inspection

Perform visual inspections every 250 operating hours. Look for oil leaks, housing cracks, abnormal seal wear, and any visible damage to external components.

Lubricant change

Differential and final drive oil should be changed every 1000 operating hours or according to manufacturer specifications. Always use the lubricant type recommended by Dana Spicer for your specific model.

Bearing adjustment

Wheel bearings should be checked every 500 hours. Improper adjustment can cause premature wear, overheating, and eventually catastrophic failure.

Universal joint inspection

Universal joints (cross joints) are critical components that require regular lubrication. Check axial and radial play, and replace any cross joint showing excessive wear.

Alignment

Correct axle alignment is essential to prevent uneven tire and drivetrain component wear. Check alignment after any major repair or if abnormal vibrations are detected.

At Caseetrans we have the complete inventory of Dana Spicer spare parts and specialized technical advice for your axle maintenance.